Chemiflex® PTFE SGF947/SSF947 Chemical Hose

Fluoropolymer (PTFE or ECTFE) lined composite hose assemblies with a standard T316 stainless steel inner wire and a galvanized steel outer wire with chemically engineered 100% resistant barrier layers embedded in the hose wall to prevent aggressive chemical attack and leakage.

Hose assemblies are capable of pressurization and full vacuum with a diverse selection of end fittings and materials where chemical attack or erosion of the outer wire require the option of a stainless steel outer wire. Working pressures of up to 250 psi (17 bar) with conformance to EN 13765:2010 and working temperatures of up to 100 degrees C (212 F).

Special Chemiflex^® Fluoropolymer Chemical Hose Type SGF947 and SSF947

This type is designed for hazardous chemical where a fluoropolymer chemical resistant liner is required for tank truck, railcar, and in plant transfer hose suitable for use with a wide variety of chemicals.

Color/Cover: SGF947 Red/PVC Coated Nylon, Abrasion, Ozone Resistant; SSF947 Red Blue Stripe/PVC Coated Nylon, Abrasion, Ozone Resistant
Inner Wire: T316 Stainless Steel Wire
Inner Lining: PFA, FEP, ECTFE
Carcass: Polypropylene Fabrics, Films
Outer Wire: SGF947 Galvanized Steel; SSF947 T316 Stainless Steel
Extra: Special Color Coding and Branding

Temperature Range: -22°F to +212°F (-30°C to +100°C)
Maximum Elongation: ≤10% on test pressure
Vacuum Range: 26 inHg (660 mmHg), 0.9 bar
Electrical Properties: Electrically Conductive; ≤2.5 ohm/m for sizes less than 2″; ≤1.0 ohm/m for size 2″ and above

BS5842, NAHAD-600:2005

Specially designed end fittings have been developed for use with Titeflex US Hose composite hoses that have a unique leak-proof sealing face and specially machined helical spiral shank which engages into the corresponding internal helix wire when secured into the hose by either crimping or swaging the external ferrules.

Chemiflex PTFE SGF947 SSF947 Chemical Hose Tech Specs

Pressure based on safety factor 4:1. Dimensions and weight are approximate and are subject to change. For additional technical data such as pressure drop, max. flow rates and tensile strength, please consult Titeflex US Hose engineering. Increased operating temperatures will reduce working pressure of the assemblies. Fitting pressure rating may limit working pressure of the assembly. Rated working pressure is @ 70°F (21°C).

Download PDF