Chemiflex® SGP951/SSP951 Small Diameter Chemical Hose

Polypropylene lined composite hose assemblies with a T316 stainless steel inner and a galvanized steel outer wire with chemically engineered 100% resistant barrier layers embedded in the hose wall to prevent chemical attack and leakage.

Hose assemblies are capable of pressurization and full vacuum with a diverse selection of end fittings and materials for chemical transfer applications and where a T316 stainless steel inner wire provides a higher degree of purity. Working pressures of up to 250 psi (17 bar) with conformance to EN 13765:2010 and working temperatures of up to 100 degrees C (212 F).

Chemiflex^® Heavy Duty Polypropylene Chemical Hose Type SGP951 and SSP951

This type is designed for use as a tank truck, railcar, and in plant transfer hose suitable for use with a wide variety of chemicals with a wide variety of chemicals with a T316 stainless steel inner wire is standard.

Color/Cover: Gray Blue Stripe/PVC Coated Nylon, Abrasion, Ozone Resistant; Gray Blue Stripe/PVC Coated Nylon, Abrasion, Ozone Resistant
Inner Wire: 316SS Stainless Steel Wire
Inner Lining: High Density Polypropylene
Carcass: Polypropylene Fabrics, Films
Outer Wire: SGP951 Galvanized Steel; SSP951 316SS Stainless Steel
Additional Options: Special Color Coding and Branding

Temperature Range: -22°F to +212°F (-30°C to +100°C)
Maximum Elongation: ≤10% on test pressure
Vacuum Range: 26 inHg (660 mmHg), 0.9 bar
Electrical Properties: Electrically Conductive; ≤2.5 ohm/m for sizes less than 2″; ≤1.0 ohm/m for size 2″ and above

BS5842, NAHAD-600:2005

Specially designed end fittings have been developed for use with Titeflex US Hose composite hoses that have a unique leak-proof sealing face and specially machined helical spiral shank which engages into the corresponding internal helix wire when secured into the hose by either crimping or swaging the external ferrules.

Chemiflex SGP951 SSP951 Small Diameter Chemical Hose Tech Specs

Pressure based on safety factor 4:1. Dimensions and weight are approximate and are subject to change. For additional technical data such as pressure drop, max. flow rates and tensile strength, please consult Titeflex US Hose engineering. Increased operating temperatures will reduce working pressure of the assemblies. Fitting pressure rating may limit working pressure of the assembly. Rated working pressure is @ 70°F (21°C).

Download PDF