Polypropylene lined composite hose with high strength galvanized steel inner and outer wires providing conductive assemblies that allow for exceptional light weight handling with supreme flexibility and kink resistance available for vapor recovery and light fuel transfers yet engineered to withstand a hard vacuum.
With a wide selection of end connections including aluminum flanges and couplers, aluminum TTMA flanges and aluminum threaded fittings. Working pressures of up to 100 psi (7 bar) with conformance to EN 13765:2010 and working temperatures of up to 100 degrees C (212 F).
Chemiflex® Vapor Recovery Polypropylene Hose Type GGV, PGV, SGV 944
This type is designed for use at tank truck, rail car and marine terminals in ship-to-shore applications for vapor recovery of oils and chemicals. Widely used for it’s high flexibility and robustness, this hose sets the standard.
Color/Cover: GGV Yellow/PVC Coated Nylon, Abrasion, UV and Ozone Resistant; PGV Yellow Black Stripe/PVC Coated Nylon, Abrasion and Ozone Resistant; SGV Yellow Black and Red Stripe/PVC Coated Nylon, Abrasion and Ozone Resistant
Inner Wire: GGV Galvanized Steel; PGV Black Polypropylene Coated Steel; SGV T316 Stainless Steel
Inner Lining: High Density Polypropylene
Carcass: Polypropylene Fabrics, Films
Outer Wire: Galvanized Steel
Temperature Range: -22°F to +212°F (-30°C to +100°C)
Maximum Elongation: ≤10% on test pressure
Vacuum Range: 26 inHg (660 mmHg), 0.9 bar
Electrical Properties: Electrically Conductive; ≤2.5 ohm/m for sizes less than 2″; ≤1.0 ohm/m for size 2″ and above
EN13765:2010, Type 2, USCG, 33CFR Section 154.810, BS5842, NAHAD-600:2005
Specially designed end fittings have been developed for use with Titeflex US Hose composite hoses that have a unique leak-proof sealing face and specially machined helical spiral shank which engages into the corresponding internal helix wire when secured into the hose by either crimping or swaging the external ferrules.
Pressure based on safety factor 4:1. Dimensions and weight are approximate and are subject to change. For additional technical data such as pressure drop, max. flow rates and tensile strength, please consult Titeflex US Hose engineering. Increased operating temperatures will reduce working pressure of the assemblies. Fitting pressure rating may limit working pressure of the assembly. Rated working pressure is @ 70°F (21°C).