Polypropylene lined composite hose assemblies with a T316 stainless steel inner and a galvanized steel outer wire with chemically engineered 100% resistant barrier layers embedded in the hose wall to prevent chemical attack and leakage.
Hose assemblies are capable of pressurization and full vacuum with threaded or flanged end connections for the arduous marine service conditions. Working pressures of up to 250 psi (17 bar) with conformance to EN 13765:2010 and working temperatures of up to 100 degrees C (212 F).
Chemiflex® Polypropylene Chemical Hose Type SGP969 and SSP969
This hose is specifically designed as a bulk liquid transfer hose from barges, ships and ocean going vessels for all chemicals.
Color/Cover: SGP969 Aqua Green with a Blue Stripe/2x PVC Coated Nylon, Abrasion and Ozone Resistant; SSP969 Aqua Green with a Double Blue Stripe/2x PVC Coated Nylon, Abrasion, and Ozone Resistant
Inner Wire: T316 Stainless Steel
Inner Lining: High Density Polypropylene
Carcass: Polypropylene fabrics, Films and Polypropylene/Nylon
Outer Wire: SGP969 Galvanized Steel; SSP969 T316 Stainless Steel
Temperature Range: -22°F to +212°F (-30°C to +100°C)
Maximum Elongation: ≤10% on test pressure
Vacuum Range: 26 inHg (660 mmHg), 0.9 bar
Electrical Properties: Electrically Conductive; ≤1.0 ohm/m
BS5842, USCG 33CFR 154.500
Bureau Veritas and Nippon Kaiji Kyokai Type Approval to IBC & BCH codes of IMO Resolutions for carrying dangerous chemicals in bulk at sea.
Specially designed end fittings have been developed for use with Titeflex US Hose composite hoses that have a unique leak-proof sealing face and specially machined helical spiral shank which engages into the corresponding internal helix wire when secured into the hose by either crimping or swaging the external ferrules.
Pressure based on safety factor 4:1. Dimensions and weight are approximate and are subject to change. For additional technical data such as pressure drop, max. flow rates and tensile strength, please consult Titeflex US Hose engineering. Increased operating temperatures will reduce working pressure of the assemblies. Fitting pressure rating may limit working pressure of the assembly. Rated working pressure is @ 70°F (21°C).