Polypropylene lined composite hose with high tensile strength galvanized steel inner wire with 100% aromatic and chemical resistant barrier layers embedded in the hose wall to prevent permeation and leakage.
Hose assemblies are conductive and are capable of full vacuum with threaded or flanged end connections for the arduous frac service conditions. The hose remains flexible no matter the atmospheric conditions with suitability for frack water and chemicals. Working pressures of up to 250 psi (17 bar) with conformance to EN 13765:2010 and temperatures of up to 100 C (212 F).
Roughneck® Polypropylene Composite Hose Type 1181GGP and 3181PGP
This type is designed for use as a Frac or Pump hose, User friendly to make tight effortless connections easer in a confined area. Unlike stiff rubber frac/pump hose Roughneck® is ozone resistant and remains flexible in all conditions, even subzero.
Color/Cover: 1181GGP Blue/PVC Coated Nylon, Abrasion, UV and Ozone Resistant; 3181 PGP Blue Black Stripe/PVC Coated Nylon, Abrasion and Ozone Resistant
Inner Wire: 1181GGP Galvanized Steel; 3181 PGP Black Polypropylene Coated Steel
Inner Lining: High Grade Polypropylene
Carcass: Polypropylene Fabrics, Films and Seamless Tubes
Outer Wire: Galvanized Steel
Logo: Roughneck®
Extra: Special Color Coding and Branding
Temperature Range: -22°F to +212°F (-30°C to +100°C)
Maximum Elongation: ≤10% on test pressure
Vacuum Range: 26 inHg (660 mmHg), 0.9 bar
Electrical Properties: Electrically Conductive; ≤2.5 ohm/m for sizes less than 2″; ≤1.0 ohm/m for size 2″ and above
EN13765:2010, IMO, IBC, BS5842, NAHAD-600:2005
Specially designed end fittings have been developed for use with Willcox Composite hoses that have a unique leak-proof sealing face and specially machined helical spiral shank which engages into the corresponding internal helix wire when secured into the hose by either crimping or swaging the external ferrules.
Pressure based on safety factor 4:1. Dimensions and weight are approximate and are subject to change. For additional technical data such as pressure drop, max. flow rates and tensile strength, please consult Titeflex US Hose engineering. Increased operating temperatures will reduce working pressure of the assemblies. Fitting pressure rating may limit working pressure of the assembly. Rated working pressure is @ 70°F (21°C).
