Polyester lined composite hose assemblies for LPG and is certified by The Canadian CSA to CAN/CGA-8-M86 Type 1 up to and including 2” diameter for use with LPG with a high tensile strength galvanized steel inner and outer wire with engineered 100% LPG resistant barrier layers embedded in the hose wall to prevent permeation and leakage.
Hose assemblies are capable of pressurization and full vacuum with a diverse selection of end fittings and materials for LPG transfer applications. Working pressures of up to 350 psi (25 bar) with conformance to EN 13765:2010 and working temperatures from -30 C (-20 F) to 135 degrees C (275 F).
Cryoflex® 20 LPG Hose Type GGY974
This hose is specifically designed for use with liquid propane (LPG).
Color/Cover: White w/ Yellow Stripe, Nylon, Abrasion, UV and Ozone Resistant
Inner Wire: Galvanized Steel
Inner Lining: Polyester
Carcass: Polyester Fabrics and Films
Outer Wire: High Tensile Galvanized Steel Wire
Temperature Range: -20°F to +275°F (-30°C to +135°C)
Maximum Elongation: ≤10% on test pressure
Vacuum Range: 26 inHg (660 mmHg), 0.9 bar
Electrical Properties: Electrically Conductive; ≤1.0 ohm/m
CSA 8:1 M86-CAN/C9A Type l and USCG 33 CFR Section 127.1102
Canadian Standards Authority CSA 8:1 M86-CAN/9A Type l. CSA applicable through 2″ diameter only. CRN Approvals based on standard end fitting configurations are available.
Specially designed end fittings have been developed for use with Titeflex US Hose composite hoses that have a unique leak-proof sealing face and specially machined helical spiral shank which engages into the corresponding internal helix wire when secured into the hose by either crimping or swaging the external ferrules.
Pressure based on safety factor 5:1. Dimensions and weight are approximate and are subject to change. For additional technical data such as pressure drop, max. flow rates and tensile strength, please consult Titeflex US Hose engineering. Increased operating temperatures will reduce working pressure of the assemblies. Fitting pressure rating may limit working pressure of the assembly. Rated working pressure is @ 70°F (21°C). 3″ Diameter Hose is not covered by the requirements of CSA 8:1 M86-CAN/C9A Type l.