Polypropylene lined composite hose with aluminum inner and outer wires conductive assemblies provide light weight handling with supreme flexibility and kink resistance available for vapor recovery and light fuel transfers and engineered to withstand a hard vacuum.
A wide selection of end connections. Working pressures of up to 100 psi (7 bar) with conformance to EN 13765:2010 and working temperatures of up to 100 degrees C (212 F).
Ultra Lightweight Polypropylene Drop Hose Type AAD 944020
This type is designed for use as a drop hose in tank truck, railcar and inplant applications where an aluminum inner wire is standard. With optional aluminum or galvanized steel wire (for improved crush resistance).
Color/Cover: Orange/PVC Coated Nylon, Abrasion, UV and Ozone Resistant
Inner Wire: Aluminum #5052
Inner Lining: High Density Polypropylene
Carcass: Polypropylene Fabrics and Nylon Films
Outer Wire: AAD Aluminum #5052; AGO Galvanized Steel
Temperature Range: -22°F to +212°F (-30°C to +100°C)
Maximum Elongation: ≤10% on test pressure
Vacuum Range: 26 inHg (660 mmHg), 0.9 bar
Electrical Properties: Electrically Conductive; ≤2.5 ohm/m for sizes less than 2″; ≤1.0 ohm/m for size 2″ and above
USCG, BS5842, NAHAD-600:2005
Fittings are designed with a specially machined helical shank which enables it to be screwed into the matching internal helix wire. The external ferrule can be either crimped or swaged.
Pressure based on safety factor 4:1. Dimensions and weight are approximate and are subject to change. For additional technical data such as pressure drop, max. flow rates and tensile strength, please consult Titeflex US Hose engineering. Increased operating temperatures will reduce working pressure of the assemblies. Fitting pressure rating may limit working pressure of the assembly. Rated working pressure is @ 70°F (21°C).