Fluoropolymer (PTFE) lined composite hose assemblies for high temperature aggressive chemicals.
Suitable up to 162 degrees C/325 degrees F with a T316 stainless steel inner wire and a galvanized steel outer wire with chemically engineered 100% resistant barrier layers embedded in the hose wall to prevent aggressive chemical attack and leakage from molten Sulphur or fuming sulphuric acid. Hose assemblies are capable of pressurization and full vacuum with a diverse selection of end fittings and materials where chemical attack or erosion of the outer wire require the option of a stainless steel outer wire/ Working pressures of up to 150 psi (10 bar) with conformance to EN 13765:2010 and working temperatures of up to 162 degrees C (325 F).
High Temperature Fluoropolymer ThermMaster® Hose Type GGF474, SGF474, SSF474
This type is especially designed for conveyants at higher temperatures using PTFE and non polypropylene polymetric materials. Suitable for molten sulphur, hot oils and chemicals up to 325 F/162 C.
Color/Cover: GGF474 Orange Red Stripe/PVC Coated Nylon, Abrasion, Ozone Resistant; SGF474 Orange Red & Blue Stripe/PVC Coated Nylon, Abrasion, Ozone Resistant; SSF474 Orange & Blue Stripe/PVC Coated Nylon, Abrasion, Ozone Resistant
Inner Wire: T316 Stainless Steel Wire
Inner Lining: PFA, FEP, ETFE
Carcass: Heat Resistant Poylmeric Fabrics and Films and PTFE Linings are Standard
Outer Wire: GGF474 & SGF474 Galvanized Steel; SSF474 T316 Stainless Steel
Temperature Range: -22°F to +325°F (-30°C to +162°C)
Vacuum Range: 26 inHg (660 mmHg), 0.9 bar
EN13765 Type 4
Specially designed end fittings have been developed for use with Titeflex US Hose composite hoses that have a unique leak-proof sealing face and specially machined helical spiral shank which engages into the corresponding internal helix wire when secured into the hose by either crimping or swaging the external ferrules.
Pressure based on safety factor 4:1. Dimensions and weight are approximate and are subject to change. For additional technical data such as pressure drop, max. flow rates and tensile strength, please consult Titeflex US Hose engineering. Increased operating temperatures will reduce working pressure of the assemblies. Fitting pressure rating may limit working pressure of the assembly. Rated working pressure is @ 70°F (21°C).
